Paul Reilly Company
Paul Reilly Company
1967 Quincy Court, Glendale Heights, IL 60139
Phone: 800-236-0234
Fax: 630-529-1499
Email: info@paulreilly.com
Website: www.companydomain.com
Print Back
High Density, Dual Cylinder, Heavy Commercial, Dry Pack Compactor
  • Reduce Hauling Costs - Compacting waste with a dual cylinder compactor means fewer trips to the landfill.
  • Reduce Employee Labor - Use the compactor instead of your employees to break down large bulky refuse.
  • Reduce employee pilferage with a security chute system.
  • Meets or Exceeds Current ANSI Safety Standards for Stationary Compactors.
  • Dry Pack, Forward Sloping Floor Design - Liquid waste runs into the container reducing unsightly and offensive liquid discharge behind the ram and under the compactor.
  • Heavy Commercial/Light Industrial Construction for applications with 1 to 2 container pulls per week.
  • Large 42" x 57" Clear Top Opening.
  • Engineering services for system designs that meet your individualized needs.
  • American Manufacturer Electrical and Hydraulic Components - Specified for dependability, serviceability and nationwide availability.
  • Outperforms and outlasts all other stationary compactors in its class.
  • Industry’s leading Warranty
    • Three Years Ram and Frame Weldment
    • One Year Electrical and Hydraulic Components
    • Parts and Labor
Conforms to Current ANSI Z245.2 Safety Standards
Unit of Measure

Specifications

Model

 N/A CP-2102, 2 cu. yd. Stationary Compactor

Mrf's Rating

 N/A 2 yd³

WASTEC Type Rating

 N/A 1.47 yd³

Clear Top Opening Length

 N/A 42 in

Clear Top Opening Width

 N/A 57.5 in

Chamber Length

 N/A 43.5 in

Ram Stroke

 N/A 60 in

Ram Penetration

 N/A 16.5 in
Normal Force Rating1 N/A 44.8 / 70,700
Max. Force Rating2 N/A 49.8 / 78,500

Normal Hydraulic Syst. Pressure

 N/A 1,800 psi

Max. Hydraulic Syst. Pressure

 N/A 2,000 psi

Ram Face - Width

 N/A 59.5 in

Ram Face - Height

 N/A 26.5 in

Volume Displacement

 N/A 84 yd³/h

Motor

 N/A 10 hp

Cycle Time

 N/A 63 s

Discharge Opening - Width

 N/A 61.5 in

Discharge Opening - Height

 N/A 33.5 in

Discharge Opening - from Ground

 N/A 16 in

Base Unit Weight

 N/A 6,200 lb

Standard Features

Standard Features

 N/A
  • Frame:
    • Floor, Work Hardening Steel Plate 3/8"
    • Floor Supports (6) C3 x 4.1#, (1) C4 X 5.4#, (1) C6 x 13#
    • Side Plates 1/4"
    • Side Supports (3) 6 x 8.2#
    • Breaker Bar 1-1/2" x 8" Vertical Bar
    • Weldment 1" x 4-1/2" Horizontal Bar
  • Ram:
    • Face Plate 5/8"
    • Floor Plate 5/8"
    • Side Plates 3/16"
    • Top Plate 1/4"
    • Top Supports (8) C4 x 5.4#
    • Guides - Adjustable Nylatron Blocks
  • Removable Access Panels
  • Weatherhood/Safety Panels
  • Ratchet Binder/Hooks: 90,000# Capacity
  • Remote Power Unit
  • Reservoir: 40 Gallon Capacity
  • Oil - Suitable for Wide Temperature Range
  • Oil Sight Gauge with Thermometer
  • Pump: 16 GPM, Constant Displacement Vane Type
  • Cylinders: (2) 5" Bore x 3" Rod x 60" Stroke
  • UL Listed Electrical Components
  • Motor: 10 HP Tri-Volt 3 PH
  • Controls In Main Panel:
    • Automatic Multicycle
    • Automatic Safety Retract
    • Automatic/Manual Selector Switch
    • Ram Position Switch
    • Full/Jam Automatic Shut-off with Indicator
    • Key Lock On/Off Switch
    • Pull-To-Start/Emergency Push-To-Stop Button
 Remote-Power-Unit.jpg

Optional Features

Optional Features

 N/A
  • Safety Handrails
  • Safety Gate w/Interlock
  • Side or Rear Load Hopper
  • Enclosed Hopper w/Door
  • Security Chute (Side or Rear)
  • Full Enclosure
  • Safety Interlock System
  • Deodorizer Spray System
  • UL Certified Panel
  • Photo Electric Start System
  • Keyed Pinning/Boost Override System
  • Advance Full Load Indicator
  • TEFC Motor
  • Low Oil Indicator with Shut-off
  • Thermo Oil Heater
  • Power Unit Weather Cover
  • Container Guide
  • Through Wall Ratchet Kit

Caution!

Caution!

 N/A This equipment Should Be Operated By Properly Trained Personnel. Improper Use, Misuse or Lack of maintenance could cause injury to people and/ or property.
Photos used in this brochure are illustrative only. Due to its commitment to quality, SP Industries’ specifications are subject to change without notice to accommodate improvements to its equipment. Information contained within this literature is intended to be the most accurate available at the time of printing.
  • 1 Ram PSI at stated forces lbs.
  • 2 Ram PSI at stated forces lbs.